Enviroguard is an innovative and environmentally sound disposal method of waste water and concrete slurry. The Enviroguard chute rinse system is easily installed on to all ready mix concrete trucks. It is well built, simple to use and inexpensive to maintain. With environmental standards and regulations steadily tightening opperators are no longer permitted to dump dirty water and concrete slurry on to the ground or near fresh water ways, storm water systems or sewers. The Enviroguard system improves truck turn around times and efficiencies.It collects all waste water and concrete slury, removing risk of penalties and fines from regional authorities.
Environmental standards and regulations are steadily tightening. This creates a problem for ready-mix truck drivers who must clean their truck's chutes after delivering loads of concrete. Traditionally, drivers have simply hosed down their chutes, and let the dirty water pool on the ground or infiltrate into storm sewers.
However, authorities are becoming increasingly concerned about the effect this high pH slurry water has on fish bearing streams and ground vegetation. Many contractors are now required to provide water tight washout containers at their job sites. What's more, legislation that restricts environmentally improper site washouts is likely in many parts of North America.
The solution to these problems is the Enviroguard Chute Wash System. It lets drivers clean their trucks without creating any hazard to the environment. It's also affordable, easy to install and user-friendly.
The Enviroguard system was developed by a team who all work in the ready-mix industry. This team included drivers, maintenance and management personnel. So you can be confident that it addresses every aspect of the problem. The Enviroguard system is an environmentally-friendly solution that all ready mix concrete operators will want to use.
