Save Your Back AND Your Time!
Uses Leverage, Not Strength!

This patented tool from the USA uses leverage rather than strength or brute force to remove decking boards with the minimal amount of effort. This monster drasticly reduces project time. All builders like me know that the worst part of deck renovation is the removing of the old decking boards.

Traditional methods in the past to remove decking boards have been hammers, sledge hammers, pinch bars or even the odd length of 4 x 2. Anything that will remove the boards was used. Now to make the job easy there is the Duckbill Deck wrecker from the USA.

The deck wrecker sits on the joist with two legs that slip under the decking boards that you want to remove. With 1.5 meters of leverage the deck wrecker will easy pry up the old decking boards. You stand on the old section of deck and push or pull on the handle of the Duckbill. The head will rotate 180 degrees to suit the best angle of attack.

Manufactured with the best materials in the USA the deck wrecker is strong and durable. With a light weight fibre glass and padded non slip grip this tool is great to work with. The head of the deck wrecker is corrosion resistant and designed for years of rugged trouble free use. The manufacturer also provides a 15 year warranty on the workmandship of the tool.

STEP 1: Remove outside board first to allow access for tool to straddle joist.

STEP 2: With tool in position 2, start on outside of deck & work toward structure, removing all boards as close to structure as possible.

STEP 3: Rotate head to position 1. While standing on a safe platform over the exposed joist. Remove remaining boards.